Thanks for the Info. I created Loopback IP loopback 1 172.16.1.2 and Loopback 101 with IP 192.168.0.2. I wanted the router identifier to be Loopback 1, which is not possible as per statement. Is there any way out.
The reason for that is if you have multiple loopback interfaces then it will choose the loopback interface with the highest ip address.There is no way to get around this rule.
The only way is to use either a single loopback interface or make sure the static RID that you need has the highest ip address amongst all the loopback interfaces that you have configured on the router
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...