Hello
I'm seeing the following services disabled on a WAE-574 device (4.4.1). This started happening after replacing a failed hard disk. I tried doing a disk delete-data-partition but I'm still getting the alarms below.
How can I restart the nodemgr svc? The CIFS AO won't come up, tried restarting it. Do I need to wait until the disk completely rebuilds itself? The partitions are still synchronizing which takes all day to finish.
Critical Alarms:
----------------
Alarm ID Module/Submodule Instance
--------------- -------------------- ---------------
1 svcdisabled nodemgr device_mgr
2 svcdisabled nodemgr actastor_watchdog
Major Alarms:
-------------
None
Minor Alarms:
-------------
Alarm ID Module/Submodule Instance
--------------- -------------------- ---------------
1 primary_interface CIFS_AO/primary_interface CIFS_AO <-- The primary interface is set to standby 1. don't know why it thinks it's not set.
how disk det
Physical disk information:
disk00: Present 9WJ1NY25 (h00 c00 i00 l00 - Int DAS-SATA)
476937MB(465.8GB)
disk01: Present 9WJ1NXR1 (h01 c00 i00 l00 - Int DAS-SATA)
476937MB(465.8GB)
Mounted file systems:
MOUNT POINT TYPE DEVICE SIZE INUSE FREE USE%
/sw internal /dev/md0 991MB 710MB 281MB 71%
/swstore internal /dev/md1 991MB 477MB 514MB 48%
/state internal /dev/md2 5951MB 173MB 5778MB 2%
/local/local1 SYSFS /dev/md4 14878MB 132MB 14746MB 0%
/vbspace GUEST /dev/data1/vbsp 188467MB 128MB 188339MB 0%
.../local1/spool PRINTSPOOL /dev/data1/spool 991MB 32MB 959MB 3%
/obj1 CONTENT /dev/data1/obj 121015MB 128MB 120887MB 0%
/ackq1 internal /dev/data1/ackq 1189MB 0MB 1189MB 0%
/plz1 internal /dev/data1/plz 2379MB 1MB 2378MB 0%
/dre1 CONTENT /dev/data1/dre 119031MB 116977MB 2054MB 98%
Software RAID devices:
DEVICE NAME TYPE STATUS PHYSICAL DEVICES AND STATUS
/dev/md0 RAID-1 NORMAL OPERATION disk00/00[GOOD] disk01/00[GOOD]
/dev/md1 RAID-1 REBUILDING (0.0%) disk00/01[GOOD] disk01/01[!!NOT UP TO DATE!!]
/dev/md2 RAID-1 NORMAL OPERATION disk00/02[GOOD] disk01/02[GOOD]
/dev/md3 RAID-1 NORMAL OPERATION disk00/03[GOOD] disk01/03[GOOD]
/dev/md4 RAID-1 REBUILDING (0.0%) disk00/04[GOOD] disk01/04[!!NOT UP TO DATE!!]
/dev/md5 RAID-1 REBUILDING (52.3%) disk00/05[GOOD] disk01/05[!!NOT UP TO DATE!!]
*** NOTE ***
One or more RAID constituent disk partitions appear to be abnormal.
This could be because of
problem in drive's partition(s) and it is being rebuilt
Possible I/O errors on a disk drive
Please run "show alarms critical detail support"
to check any critical disk errors.
RAID-1 volumes will continue to operate on the remaining disk drive.
Please refer to the product documentation for further
information on how to handle this situation.
Disk encryption feature is disabled.