Unable to modify any document through Cisco Edge WAE
I'm having problems modifying documents (MS Office files) through my Cisco Edge WAE and I don't know if it's a problem in the cache or where the problem may be so I hope any of you have had this problem before to help me out finding a solution.
This is the scenario:
My Cisco Edge WAE is running the version 4.0.19.b14. For the moment I'm not using WCCP (to be implemented in the near future). The device is registered with the CM with Edge and print services enabled.I have the file server exported and pointing to my NAS server (apparently, all these steps have been well configured).
Lets say the NAS server is called NAS01 and I have the connectivity created call ESM exported to my NAS01 file server with the alias NASFS01 and the edge device assigned to this connection. All seems to be correct, in fact, if I type the Alias NASFS01, I can reach the server with no problem and create an excel document for example but when I try to open the same file and get it modified and I got the message that I don't have enough rights to do it, strange because if I have a look at the permissions of the folder (NAS01) I can see myself with full permissions.
I tried to get access and do the same in other WAAS out of my region, and it worked perfectly with the same access.
The only thing I saw was when I type #sh disk details:
Software RAID devices: DEVICE NAME TYPE STATUS PHYSICAL DEVICES AND STATUS /dev/md0 RAID-1 NORMAL OPERATION disk00/00[GOOD] disk01/00[GOOD] /dev/md1 RAID-1 NORMAL OPERATION disk00/01[GOOD] disk01/01[GOOD] /dev/md2 RAID-1 NORMAL OPERATION disk00/02[GOOD] disk01/02[GOOD] /dev/md3 RAID-1 NORMAL OPERATION disk00/03[GOOD] disk01/03[GOOD] /dev/md4 RAID-1 NORMAL OPERATION disk00/04[GOOD] disk01/04[GOOD] /dev/md5 RAID-1 NORMAL OPERATION disk00/05[GOOD] disk01/05[GOOD] /dev/md6 RAID-1 NORMAL OPERATION disk00/06[GOOD] disk01/06[GOOD]
Anyone has any idea about why this could be happening?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...