I am trying to use TACACS as the primary method of authentication. The thing is that I configured in WAAS the values required (security word, primary server and secondary server). Also, in Authentication Method I chose TACACS as primary and local as the secondary.
After that I logged in to the WAAS using my TACACS account and I could enter, but the Navigation Pane is empty. It seems like my account doesn't have permissions to change config, but it is level 15 in TACACS ( I used to change config in Sw and routers).
I dont know if I am missing a step to config this feature either on the WAAS or the ACS.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...