I have a need to change name servers as configured in each WAE. However after the changes are applied (via the all-devices group), and verified using 'show hosts' on each WAE, the WAE's are still attempting to use the old name server previously in use.
This is confirmed by a tcpdump on the old name server.
Is there a CLI command that can be restart name/lookup services on the WAE or is the only solution a reboot of each WAE? (A reboot fixes it - but I'd like to avoid a reboot if possible).
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...