2012 Apr 1 17:44:14 w001 java: %WAAS-CMS-0-700002: ce(DataFeedPoll): java.lang.OutOfMemoryError: unable to create new native thread: java.lang.OutOfMemoryError: unable to create new native thread at java.lang.Thread.start0(Native Method) at java.lang.Thread.start(Unknown Source) at java.lang.UNIXProcess$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.lang.UNIXProcess.<init>(Unknown Source) at java.lang.ProcessImpl.start(Unknown Source) at java.lang.ProcessBuilder.start(Unknown Source) at java.lang.Runtime.exec(Unknown Source) at java.lang.Runtime.exec(Unknown Source) at java.lang.Runtime.exec(Unknown Source) at com.cisco.unicorn.util.Utils.SystemExec(Utils.java:781) at com.cisco.unicorn.pcm.LicenseManagementHook.execCli(LicenseManagementHook.java:121) at com.cisco.unicorn.pcm.LicenseManagementHook.parseLicenseNames(LicenseManagementHook.java:265) at com.cisco.unicorn.pcm.LicenseManagementHook.getLicenseChanges(LicenseManagementHook.java:380) at com.cisco.un
2012 Apr 2 11:08:35 w001 login: %WAAS-SYSUTL-5-800003: admin login on 0 from 10.72.131.102
2012 Apr 2 11:32:46 w001 login: %WAAS-SYSUTL-5-800003: admin login on 0 from 10.72.10.140
Have you deleted this WAAS device from the Central Manager at any point as it can cause this?
1) Login into the WAAS appliance.
2) Check the WAAS can ping the Central Manager IP address.
3) run "cms deregister force"
**Note**: This will shutdown cms and force a deregistration to be send to the Central Manager which will break any optimised session you currently have running and will delete the cache and the secure store on the WAAS.
3) run "cms enable"
wait for the registration to complete.
4) check cms "show cms info", see if has registered now.
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...