I have a wan betwen two sites, and i'm going to work waas with wae core, edge and central manager, in main site i have 1MB of bandwith and the remote site i have 512kb of bandwith. Please colud you tell me and advice to choose between deploy waas inline or wccp v2, I would like to work all the capacities and performance of the waas.
I would like to work with one of them, and i'm not sure to choose
Irrespective of the interception method (Inline or WCCP) you can use the full features and capacity of WAAS. Interception method has no relation to the usage of features on WAAS. Interception is only a method to redirect TCP traffic towards WAAS and WAAS will do the rest.
Although it is recommended to deploy WCCP for scalability and easy introduction, however depending on your network design you can decide whether you want to go with WCCP or Inline.
If you want to go with WCCP, please make sure the router / switch platforms that you have support WCCP v2. Below is a link for checking the WCCP platform support matrix.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...