I have 2 sites, in the first is the Data Center and in the other is a small Branch (25 user). I want to install WAAS, in the DC a WAVE-474 (accelerator mode) and WAVE-274 (Central Manager Mode) and in the small Branch a WAVE-474.
I found in a document that the WAVE-474 doesn´t have capacity to fan-out.
The idea is to start with 2 sites (the core and remote site), then when we have to add a new remote site, then the WAVE-474 will be sent to the new remote site and in the Core would use a WAVE-574 or WAE-512.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...