In WAAS Setup we are not seeing any Optimized EMAPI connection and below error is showing in Alarm section for all Edge WAE devices.
Wansecure encountered a peering service configuration error: ssl peering service configuration mismatch with peer device id 88:f0:31:b3:6e:c8. The following protocol acceleration can fail: SSL-AO, ICA (if using Wansecure) and Encrypted MAPI.
We have verified the SSL peering configuration between Edge and core device and not found found any mismatch between them. Please suggest how we can resolve this issue.
Try the following on all the WAAS devices participating in the flow. (Core + edge)'
WAAS #sh acc wansecure
Accelerator Licensed Config State Operational State
----------- -------- ------------ -----------------
wansecure Yes Enabled Running
Accelerator Config Item Mode Value
----------------------- ---- ------
SSL AO User enabled
Secure store User enabled
Peer SSL version User default
Peer cipher list User configured
Peer cert User default <<<<Should be same for all devices
Peer cert verify User enabled
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...