cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1360
Views
5
Helpful
2
Replies

Waas error message - WAAS-SYS-4-900000: time.c: can't update CMOS

cwehrstedt
Level 1
Level 1

This was moved from another board,

I this error on our syslog server from our WAE-7371 (running older code, but that is in the works to upgrade shortly,4.1.3b) , and I have checked the clocks on the inline devices and the CM and all are set insync.  Any other ideas?

kernel: %WAAS-SYS-4-900000: time.c: can't update CMOS

1 Accepted Solution

Accepted Solutions

fbergamo
Cisco Employee
Cisco Employee

Hi Cora,

With the NTP source being the same on on all devices and the clock in sync among them, the battery problem was confirmed in the bmc.log as the last entries indicated the power off/down with timestamp 01/02/1970.

The resolution is to RMA the appliance.

Regards,

Fabio Bergamo

Cisco TAC

View solution in original post

2 Replies 2

cwehrstedt
Level 1
Level 1

Did a TAC, and they suggested it may be a Bad CMOS battery.

fbergamo
Cisco Employee
Cisco Employee

Hi Cora,

With the NTP source being the same on on all devices and the clock in sync among them, the battery problem was confirmed in the bmc.log as the last entries indicated the power off/down with timestamp 01/02/1970.

The resolution is to RMA the appliance.

Regards,

Fabio Bergamo

Cisco TAC