Since you mention 'each location' I will assume application accelerators. If you are using WCCP as your redirection, WCCP will automatically redistribute the load if a WAE device fails. The status of all routers and WAEs are shared with all devices in the WCCP Here_I_AM and I_See_You packets. The lack of participation in this WCCP communication will cause the device to be removed from redirection.
If this is an inline solution, you will want to review the cabling section of the inline cards installation documentation. The WAEs will be physically patched in serial. If one WAE fails, it will go into bypass mode and the second WAE will pick up the load if it has the capacity.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...