i have a problem with my cisco WAAS network module which is i can't login console to the integrated service engine as follows :
Router#service-module INtegrated-Service-Engine 1/0 session
Trying 10.52.55.253, 2066 ... Open
then i cleared the session and found that Service Module is waiting for registration message as follows:
Router#
Router#service-module integrated-Service-Engine 1/0 status
Service Module is Cisco Integrated-Service-Engine1/0
Service Module supports session via TTY line 66
Service Module is waiting for registration message
Service Module status is not available
Router#
Trying to shutdown Service Module Integrated-Service-Engine1/0
then i tried to shutdown but got the following error:
Router#service-module integrated-Service-Engine 1/0 shutdown
Do you want to proceed with shutdown?[confirm]
Service module is not in steady state: shutdown may not work! proceed?[confirm]
Use service module reset command to recover from shutdown.
WARNING: Confirm that the service-module status shows 'is Shutdown' before removing the module or powering off the system !
Router#
Service module in slot 1 shutting down in 105 seconds...
Service module in slot 1 shutting down in 90 seconds...
Service module in slot 1 shutting down in 75 seconds...
Service module in slot 1 shutting down in 60 seconds...
Service module in slot 1 shutting down in 45 seconds...
Service module in slot 1 shutting down in 30 seconds...
Service module in slot 1 shutting down in 15 seconds...
Feb 21 12:17:49.411: %SERVICEMODULE-5-SHUTDOWN1: Service module Integrated-Service-Engine1/0 shutdown not complete: removing the module may currupt the hard-disk
please could you help me with this
Mohammad Hamed
eng.m.hamed@hotmail.com
