a bit new to waas. Doing some testing with waas in lab environment. Works great when tranfering data with ftp when link is not congested. But when I test with congested links I see that the ftp session times out (that is: files that is already cached works fine (is optimized), but new file transfer stops). See that the ftp transfer data in "large blocks". When testing without WAAS inpath, the ftp tranfer is more "smooth" and it never fails. Any ideas, tuning?
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...
Cisco Documents are usually accurate, but when it came to the document
on Cisco APIC Signature-Based Transactions it was slightly off the mark.
This document is for those novices to API like me who cant seem to
figure out how to go about performing signat...