We are running the WAAS mobile client (188.8.131.527) on a system in Australia. All comapny resource traffic goes through an IPSEC VPN tunnel to our data center and is being optimized. However, users of this system can't browse to the internet with the WAAS client enabled. Although the names are being resolved correctly using nslookup the pages aren't being displayed. The behavior seems to indicate that if the WAAS client can't optimize the traffic it is being dropped instead of passing through.
Do the users normally browse the internet thru the vpn tunnel? If not, have you configured WAAS Mobile to only optimize enterprise network traffic or is it configured to optimize all traffic (the default)? If you are optimizing all traffic then I would suggest that you reconfigure the WAAS Mobile Client Distribution to only optimize traffic that you want to go through the VPN. See the WAAS Mobile Admin Guide Chapter 7 section titled "Defining Networks to be Accelerated".
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...