This is a new install, I am trying to bring up a WAE-674 box at one my remote sites with 2 routers (a 3725 and a 2621) at this remote site and I am using WCCP for traffic redirection. I am having an issue with WCCP on the 3725 router, for some reason when I enable the command "IP wccp 62 redirect in" under the WAN serial interface I suddenly can no longer telnet to the fastethernet interface on the router but I can still ping it and still able to telnet to the loopback interface. And I have no issue with WCCP on the other 2621 router with the same config setup.
Has anyone run into this issue before ? I appreciate any feedbacks on this !!!!
I am running IOS version 12.3(14)T7 on the 3725 router and WAAS software version 4.1.1c
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...