Re: WAE-7341 Ios Copy/Upgrade

gustavosmivel · ‎09-23-2010

Hello All,

- I'm having problems to copy an IOS from My FTP server installed on my notebok to the WAE-7341 with Ios version oe7341-4.0.17.14.

- I'm doing this command copy ftp disk 148.92.85.118 / WAAS-4.0.19.14-K9.bin WAAS-4.0.19.14-K9.bin and I was able to start the ftp download, but the download is timing out after 1/3 of the file transfer.

- Could someone tell me what i'm missing or doing wrong ?

The Image have 254 MB and as you can see i've copied only 179MB

USSMCWAGDRH001#dir
      size          time of last change             name
-------------- -------------------------          -----------
          1322 Mon Sep 20 17:28:38 2010           UcliEvt.log
     179207920 Tue Sep 21 20:29:57 2010           WAAS-4.0.19.14-K9.bin   <<<<<<<<<<<<<<<
          4096 Thu Oct 22 21:40:00 2009 <DIR>    actona
          4096 Thu Oct 22 20:57:33 2009 <DIR>    core_dir
          4096 Mon Aug 2 10:26:38 2010 <DIR>    crash
             0 Fri Oct 23 01:27:00 2009           db-downgrade.log
          4096 Thu Oct 22 20:57:32 2009 <DIR>    downgrade
          4096 Tue Sep 21 17:01:00 2010 <DIR>    errorlog
          4096 Mon Aug 2 10:27:33 2010 <DIR>    logs
         16384 Thu Oct 22 20:47:03 2009 <DIR>    lost+found
          4096 Wed Aug 11 03:26:01 2010 <DIR>    sa
          8192 Wed Sep 22 12:44:02 2010 <DIR>    service_logs
           350 Mon Aug 2 10:35:33 2010           setup_gen_config.txt
          4096 Thu Oct 22 21:30:48 2009 <DIR>    spool
        154330 Wed Sep 22 12:44:07 2010           syslog.txt
          4096 Thu Oct 22 20:57:13 2009 <DIR>    var
           508 Thu Oct 22 20:57:31 2009           wdd.sh.signed
USSMCWAGDRH001#

Michael Korenbaum · ‎09-23-2010

Hi,

This sounds like an issue with your FTP server timing out the connection. You may want to increase the timeout value on the FTP server, or you can enable FTP services on the WAE itself and upload to it.

On the CLI of the 7341 enter the config command inetd enable ftp.

Then from your PC command prompt FTP into the WAE with the admin account and put the file.

Example:

C:\>ftp 14.110.3.19

Connected to 14.110.3.19.

220-Welcome to the PDI WAAS Network. Please DO NOT make any permanent

220-changes without consulting mkorenba@cisco.com

220-Cisco Wide Area Application Engine

220-

220 pdi-7341-19.pdiwaas.cisco.com FTP server (Version wu-2.7.0(1) Thu Jul 29

04:43 PDT 2010) ready.

User (14.110.3.19:(none)): admin

331 Password required for admin.

Password:

230-User admin logged in. Access restrictions apply.

230-Device is configured with a (well known) default username/password for ea

of initial configuration.

230 This default username/password should be changed in order to avoid unwant

access to the device.

ftp> bin

200 Type set to I.

ftp> hash

Hash mark printing On ftp: (2048 bytes/hash mark) .

ftp> prompt

Interactive mode Off .

ftp> mput *.bin

Then you can go back to the WAE and issue the install command, and reload the WAE to complete the upgrade.

Cheers,

Mike Korenbaum

Cisco WAAS PDI Help Desk

http://www.cisco.com/go/pdihelpdesk

P.S. if this answers your quesion, please mark it as answered with a 5.