i have trouble with my wae 7371-k9, i wanna recover it with my cd recovery waas-220.127.116.11, when i choose option 7 it cannot recreate RAID Installer Main Menu: 1. Configure Network 2. Manufacture flash (done) 3. Install flash cookie 4. Install flash image from network 5. Install flash image from cdrom 6. Install flash image from disk 7. Recreate RAID device (WAE-674/7341/7371 only) 8. Wipe out disks and install .bin image 9. Exit (Eject and reboot) Choice : 7 Recreate RAID device option is selected All disk data will be lost. Are you sure you want to recreate RAID array? [n]: y Saving random seed... dd: opening `/state/random-seed': No such file or directory No volume groups found Controllers found: 1 No logical drives scheduled for deletion. Command aborted. Failed to remove RAID Logical drive. (1,2) then i skip to option 8, after installation i booting again and the same trouble with option no 7 i cannot recreate RAID what's wrong with my waas ?
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
With Vignesh R. P.Welcome to the Cisco Support Community Ask the Expert
conversation.This is an opportunity to learn and ask questions of Cisco
expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and
support for the Cisco NX-OS Software platf...