Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WAE - Inline Module - Interception ACL - Statistics

Hello, I have a wae connected inline to the ISP Router.

The Router provide connectivity to Internet from a serial interface and from another serial interface to the DataCenter.

When I look the statistic of the Optimization/Acceleration, the value are related to all traffic; between branch office and datacenter, and to Internet.

I want the statistics only of the traffic between branch office and data center

if I use an Interception ACL on the wae with permit the traffic between private network, I can see the statistic related only this quantity of traffic between private networks ?

or, Do you have suggestions to have statistics without internet traffic ?

Everyone's tags (6)
1 REPLY
Cisco Employee

WAE - Inline Module - Interception ACL - Statistics

hi Marco,

You can create an ACL to limit the traffic intercepted.Make sure that the interception ACL is created to  match traffic flow bidirectionally on the device. Interception ACLs need  to match only the TCP SYN packet to exclude a session from  optimization. Considering both directions of traffic flow will help  limit unanticipated optimization traffic.

Source:

http://www.cisco.com/en/US/prod/collateral/contnetw/ps5680/ps6870/white_paper_c11-609128.html

I still don't fully understand how your network design really is but I hope this helps.

586
Views
0
Helpful
1
Replies