Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

WCCP and VSS on a 4500-X

I have a new pair of 4500-X switches. These are vary nice BTW. I have them configured for VSS with IOS-XE 3.4.1.SG. My question is this - can I run WCCP on these switches with VSS configured? I'm getting complicting information. I just created a WCCP group and didn't get an error.

Thanks,

Patrick

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

WCCP and VSS on a 4500-X

Hi Patrick,

please have a look at the Release Notes:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_27989-01.html#wp2612425

Short answer: WCCP with standalone is supported; with VSS, today it's not.

Your Cisco or Partner SE might have more insight on it.

Best Regards,

chris

3 REPLIES
Community Member

WCCP and VSS on a 4500-X

Hi Patrick,

please have a look at the Release Notes:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_27989-01.html#wp2612425

Short answer: WCCP with standalone is supported; with VSS, today it's not.

Your Cisco or Partner SE might have more insight on it.

Best Regards,

chris

Community Member

WCCP and VSS on a 4500-X

Thanks for the reply. I read the release notes again. I missed it the first time through.

--Patrick

Community Member

for anyone that Comes across

for anyone that Comes across this I see it has been updated to Support WCCP V2 in VSS with the Enterprise Services licensing.

 

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/ol-37xe-4500x.html

 

 


 

4332
Views
5
Helpful
3
Replies
CreatePlease to create content