3. L3 GRE connection with the Virtual WSA is not successful
Any suggestions or sharing on the likely issues are greatly apprecaited.
Thanks in advance.
Router#sh ip Router Global Router information: Router information: Router Identifier: 184.108.40.206 Protocol Version: 2.0
Service Identifier: 90 Number of Service Group Clients: 1 Number of Service Group Routers: 2 Total Packets s/w Redirected: 0 Process: 0 CEF: 0 Redirect access-list: 150 Total Packets Denied Redirect: 0 Total Packets Unassigned: 6955 Group access-list: 50 Total Messages Denied to Group: 0 Total Authentication failures: 0 Total Bypassed Packets Received: 0
Router#sh ip Router 90 d Router Client information: Router Client ID: 220.127.116.11 Protocol Version: 2.0 State: NOT Usable (Protocol not L2 connected) Redirection: L2 Packet Return: L2 Packets Redirected: 0 Connect Time: 1d04h Assignment: MASK
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...