I have LEAP authentication working but want to add mac-address to authenticate the phone. Currently VOIP1 has
authentication network-eap eap_methods. The phone is working, it authenticates the user and I can make calls. When I change the line to read
authentication network-eap eap_methods mac-address mac_methods, as well as the encryption line for the vlan, the phone does not authenticate. The phones mac address is in acs with the mac address being the password. I have been reading about akm needing to be set on the phone but do not have any idea what akm is; I can not find it on the 7920 phone. I have read and tred several posts on this forum but without success.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...