7921G Phones sometimes don't ring when got a call.
We have a problem.... well... many of them with a 7921G wifi phones.
One of them is
They are some users inside of pick up groups (all of them with 7921 phones). These pick up groups have configured with sound and visual alerts after 12 seconds. But we have a problem sometimes when any of them got a call, the caller can hear the connecting tone but the called phone doesn’t ring (or receive the call). After 12 seconds the others phones inside the group got a pick up group alert because the called phone has not got the call after 12 seconds. But the called phone hasn’t rung at any moment.
Other times the called phone rings after the partners see the pick up alerting means after 12 secons.
Other times the called pick up the phone and caller says "hay man, I have been waiting along time, what are you doing?" and the called sayd "but, the phone has just rung righ now!!"
We've had calls cuts because of covering problems. We are enhanced the convering with more APs, but the ring issue persist. Many times the parner who recive the PK alert is connected to the same AP which is connected the caller who aren't receiving the call. This is crazy
Someone konws why this issue happend?
How can I trobleshoot this? do I have to get traces from the controler o CUCM o phone? It is very dificul to detect because the problem is random.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...