Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7925G send / dial button

Hi,

This is a really simple question but I cannot seem to find a solution:

On a 7925G, when I dial a number using digits and then push "Send" (Green) button, nothing happens. Also if I choose "Dial" from Actions, nothing happens. On another hand, if I push "Send" button first, I hear dialtone and can dial.

This is a UC500 with CME 8, Phone FW is 1.3.3

The nearest I came to defining send key "action" was a

service phone sendKeyAction

command, but the described behaviour does not change, does not matter if it is set to 0 or 1.

Any ideas how to fix this?

Thanks!

3 REPLIES
New Member

Re: 7925G send / dial button

Delete the ephone-dn-template will solve this problem.

New Member

7925G send / dial button

Hi,

I had the same problem and i resolved it by recreating the cnf-files under the telephone-serivce .

#conf t

(config)#telephony-service

(config-telephony)#create cnf-files

Hope this works for you .

Thanks,

Ryan

New Member

7925G send / dial button

Hello,

Please find below a short Cisco doc that illustrates 7925G calling functions. Hope this helps resolve your problem:

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g_7925gEX_7926/8_0_1/english/user_guide/P256_BK_EBE22FA_00_wireless-ip-phones-user-guide_chapter_011.html

851
Views
0
Helpful
3
Replies