Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

access network share through wireless LAN controller 2504

Hello,

I'm having trouble accessing a network share from a wireless client through my wireless controller 2504.

I can ping the server where the share is on and also I can ping the default GW firewall.

There's no problem with the share. So I think this is some setting in the wireless LAN controller.

Somebody know wich setting this could be? So that I can access a network share through the wireless controller.

With an unmanaged wifi the network share is perfectly reachable from the client. So It has to be some setting in the controller.

Greetings,

Dominik                 

1 ACCEPTED SOLUTION

Accepted Solutions

access network share through wireless LAN controller 2504

Two questions, do you have Broadcast forwarding enabled?  Are you using the same subnet on the wire and wireless?

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
4 REPLIES

access network share through wireless LAN controller 2504

Two questions, do you have Broadcast forwarding enabled?  Are you using the same subnet on the wire and wireless?

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

access network share through wireless LAN controller 2504

No I don't have broadcast enabled. Can I do this on the wireless controller? And yes the wire and wireless are on the same subnet.

But I also see vlan settings for the ports on my wlc.

Port 1: management vlan ==> this one is connected to my switch

Port 3-4: directly connected to my managed AP ==> Wich VLAN should these 2 ports be on?

Greetings,

Dominik

New Member

access network share through wireless LAN controller 2504

Thanks Steve. I enabled global multicast and broadcast forwarding. My problem seems to be fixed now :-)

Greetings,

Dominik

New Member

access network share through wireless LAN controller 2504

The broadcast forwarding should be enabled and your vlan ID in the switch and the dynamic interface you create in controller should be same. 

871
Views
0
Helpful
4
Replies
CreatePlease to create content