I have 5 units of Lightweight AP1130 and they keep rebooting every 15 sec (seen from console). It query my DHCP server and straight away drop out and reboot. From my DHCP server, I could see DHCP request and release.
Since the AP is inline power, I could not disconnect the RJ45 and put in static IP. This happen to all the 5 units of AP.
Anyone have clue to troubleshoot? Last resort I may need to RMA all 5 units or open a tac. Thanks in advance.
Well, if your ap's are rebooting, it must be because the LAP's can't join the WLC. First make sure the time is the on the WLC and place the ap's on the same subnet and the WLC management and ap-manager's interface.... since you only have 5 LAP's. Make sure you have dhcp on that subnet also or you can set that up in the wlc if you want.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...