APs and switch voice vlans also supporting data traffic
hi, i hv a wireless IP phone,AP, 2960 switch1 and another 2960 switch2. My question is, if i configured voice vlans on th access ports on th switch1 (for voice and data), this switch1 is connected to the AP and the IP phone gets connected to the AP somehow (please guide),will this configuration work or i m missing alot of info.?
Re: APs and switch voice vlans also supporting data traffic
If you're using autonomouns (IOS, i.e. non-controller based) AP's, the preferred method of segmentation is to create your different voice, data, network mgmt vlan's on the switchs. Created the same vlan's on the AP using the sub-interfaces (CLI) or GUI vlan configuration. Ensure QoC is configured on both the AP and the swithces, then trunk the connection btw the AP and the switch.
Looking at this configuration examaple, how do i support voice and data traffic on th vlans on the AP.... Do i also have to configure a native vlan (for data) on switch1? b'se i intend to have 1 vlan tht supports both voice and data.
**** Will the configuration above work for my network?
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...