Cisco 3702i Access Point Flashing Red, Blue, Green Constantly
I have deployed 30 Cisco 3702i access points on a Cisco 5508 Wireless LAN controller running IOS code 126.96.36.199. Only 4 out of the 30 are flashing red, blue, and green constantly, but the other 26 are either solid green or solid blue like normal. The weird thing is I see my client MAC address associated to one of the flashing access points, and is able to access the network fine. Looks like a cosmetic issue, but would like to fix the flashing access points to be either solid green or solid blue like normal operation. Does anybody know why this is happening?
I have attached a video of slow motion of the LED and a video normal speed.
The color cycle is RED, BLUE, GREEN, RED, BLUE, GREEN over and over. There is no stop or pause between the colors. It is constant switching of the LED colors. As I mentioned above the AP with this affect works.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...