I have a strange problem with my new 7925 and 1252AP
No matter what I do I cant seem to get them to associate.
Phone is at factory settings
AP config is below, As you can see a SSID of voice and no security at all and still "Connection Fail" on the phone
Event logs from both phone and AP show nothing at all (no signs of even trying to associate)
I'm sure i'm missing something so basic its not funny, but cant see it at all.
I have tried setting the phone to Auto-A and Auto b/g with no luck.
version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname Alysha ! enable secret 5 $1$XlG5$zKtu1sqd7z42egjd.S0Ze. ! no aaa new-model ! ! dot11 syslog ! dot11 ssid voice authentication open guest-mode ! ! ! username Cisco password 7 106D000A0618 ! ! bridge irb ! ! interface Dot11Radio0 no ip address no ip route-cache ! ssid voice ! antenna gain 0 station-role root bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface Dot11Radio1 no ip address no ip route-cache ! ssid voice ! antenna gain 0 no dfs band block channel dfs station-role root bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface GigabitEthernet0 no ip address no ip route-cache duplex auto speed auto bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface BVI1 ip address dhcp client-id GigabitEthernet0 no ip route-cache ! ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag bridge 1 route ip ! ! ! line con 0 line vty 0 4 login local ! end
With world mode enabled, the access point
advertises the local settings, such as allowed frequencies
and transmitter power levels. Clients with this capability
then passively detect and adopt the advertised world settings,
and then actively scan for the best access point.