01-27-2014 10:54 AM - edited 07-05-2021 12:03 AM
Can I use Cisco WCS to conduct an Active Wireless Site Survey or it does only Predictive Wireless Site Survey ? I already bought a software that only do Passive but I need one to make an Active Wireless Site Survey.
I think that WCS does not provide walkthrough in active mode.
Tks.
Solved! Go to Solution.
01-27-2014 10:56 AM
WCS woudl only be able to do a Passive Survey. do to an 'active' or AP on a Stick survey you would need softare like Ekahau or Air Magnet to go out and read the RSSI/SNR from the AP.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
01-27-2014 10:56 AM
WCS woudl only be able to do a Passive Survey. do to an 'active' or AP on a Stick survey you would need softare like Ekahau or Air Magnet to go out and read the RSSI/SNR from the AP.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: