Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco WLC adding fo parameter in SIP UPDATE

     Hi All.

We have following setup--

User Phone=====>Wifi Device (non sip aware)========> WLC========>SIP Proxy

We found when User A and User B calling each other (both under above setup)  call got connected but when User 1 sending SIP sessio  refresh message  UPDATE we found 3-4 Update message modify by Cisco WLC and adding fo charcater before Update message.

fo<UPDATE sip:211222@user.com

Not sure why WLC adding fo update character is this bug in OS as fo character added in 3-4 session refresh by WLC.

PLease help me if any one come across this porblem/

Amit

2 REPLIES
New Member

Cisco WLC adding fo parameter in SIP UPDATE

Kindly go through the link for step to step configuration for SIP.

Using the GUI to Configure Voice Parameters

http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/configuration/guide/cg_controller_setting.html#wp1088037

New Member

Cisco WLC adding fo parameter in SIP UPDATE

Hi Bsant I dont think it will solve my problem,as WLC adding fo parameter before UPDATe message randomly. in given link no configuration to check ori aviod that "fo" parameter.

PLease sugggest is it bug at OS level.

Amu

1653
Views
0
Helpful
2
Replies