Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Connecting a AIR-LMC352 to an AIR-ANT3549?

Is it possible to connect a AIR-LMC352 to an AIR-ANT3549 and if so what part or manuf. cable would you use to conenct the MMCX on the card to the RP-TNC connector on the antenna?

My hope is to use this to communicate back to a 350 Series bridge in AP mode with the same AIR-ANT3549 antenna connected to it and since I'm looking at a distance of about 1500 feet - I'm assuming I'd need the LMC352 with matching antenna to reach back to the bridge instead of the integrated client adapter...

Thanks!

- Ken

2 REPLIES
New Member

Re: Connecting a AIR-LMC352 to an AIR-ANT3549?

I'm sorry - I didn't notice I was in the wrong forum when I posted this - please ignore and i'll post it in general - very sorry :-/

- Ken

New Member

Re: Connecting a AIR-LMC352 to an AIR-ANT3549?

Ken,

I can get you some part-numbers for custom MMCX to RP-TNC or any other connector that you need.

David Fulgham

ComGuard CTS Ltd.

867-979-3292

david@comguardcts.com

175
Views
0
Helpful
2
Replies
CreatePlease login to create content