02-26-2007 12:57 PM - edited 07-03-2021 01:42 PM
I have 4 controllers(2 WISMS) on one controller "Fast SSID Change" is enabled.
I want to disable it, will the cause and outage on that particular controller? Or can it be done on the fly?
Solved! Go to Solution.
02-26-2007 08:50 PM
Fast SSID makes the IP address assignment process fast when a client roams. You can change this setting on the fly...no reboot of anything will be required.
If you are using a single SSID throughout the network you have nothing to lose in terms of roaming speeds. But if the client can connect to more than one WLAN because of the availability of SSIDs then the connection speed will reduce while roaming.
02-26-2007 08:50 PM
Fast SSID makes the IP address assignment process fast when a client roams. You can change this setting on the fly...no reboot of anything will be required.
If you are using a single SSID throughout the network you have nothing to lose in terms of roaming speeds. But if the client can connect to more than one WLAN because of the availability of SSIDs then the connection speed will reduce while roaming.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide