09-17-2007 07:24 AM - edited 07-03-2021 02:38 PM
Hi,
i have a site with 3 1240AG APs and several 7920s.
APs are running 123-8.JEA2 (last IOS).
Sometimes i have one way audio between the IPPhones. After debugging i found out the following:
Sometimes (!)when a client is leaving an AP, AP-1 for example, and gets associated with AP-2, AP-2 sends the IAPP Sent Disassociation Notice to the other APs; AP-1 receives the IAPP: Rcvd Disassociation Notice but does not disassosiates the client!
So, 7920 is on AP-2 but AP-1 thinks is on itself!
What could be going wrong?
APs are connected on a 3com office connect but no vlans exist.
Also, all APs have correct MAC-address filtering.
Thanks
09-18-2007 10:01 AM
Sure the original AP is receiving the IAPP packeet from the new AP?
IAPP is a multicast packet, so will want to ensure there is minimal multicast/broadcast traffic in the AP native vlan to ensure delivery success.
Also is a requirement to have VLANs when implementing voice in the network.
09-18-2007 10:38 PM
Hi,
yes the AP receives that packet but it does nothing:
That debug is from the AP-2:
Sep 17 16:11:33.574: IAPP: Association Indication station=001b.0ce2.7900
Sep 17 16:11:33.575: %DOT11-6-ASSOC: Interface Dot11Radio0, Station SEP001b0ce27900 001b.0ce2.7900 Reassociated KEY_MGMT[NONE]
Sep 17 16:11:33.575: IAPP: Sent Disassociation Notice Dest=0140.96ff.ff00 Src=001b.0ce2.7900
Sep 17 16:11:33.576: IAPP: Sent DDP Info Report Dest=001b.0ce2.7900 Src=0019.07c7.86e0
Sep 17 16:11:33.605: IAPP: Rcvd DDP Info Report Src=001b.0ce2.7900
Sep 17 16:11:34.576: IAPP: Sent General Info. Request Dest=001b.0ce2.7900 Src=0019.56f2.ab00
And that is what AP-1 does when receives the packet:
Sep 17 16:11:34.083: IAPP: Rcvd Disassociation Notice Src=001b.0ce2.7900
ap_-1#sh dot11 associations
802.11 Client Stations on Dot11Radio0:
SSID [****] :
MAC Address IP address Device Name Parent State
001b.0ce2.78fc 192.168.1.72 CP-7920 SEP001b0ce278fc self MAC-Assoc
001b.0ce2.78ff 192.168.1.71 CP-7920 SEP001b0ce278ff self MAC-Assoc
001b.0ce2.7900 192.168.1.65 CP-7920 SEP001b0ce27900 self MAC-Assoc
It continues to have client 001b.0ce2.7900 associated.
There is no way to do vlans with 3com office connect but i don't think it is the main issue here since the wireless traffic is very low: only 5 7920s and 5 pos wireless barcode readers.
Cheers
Akoul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide