The issue may be with version of the WLSE. WLSE Radio Management scans will reset the radio periodically. Authentication and re-authentication and renewing IP Addresses (currently set to 1 day) If a client fails to authenticate or is required to re-authenticate, normally due to a connectivity loss or interface resets, they can not aquire an IP Address without re-booting.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...