Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Help with Wireless Phone Setup

I have:

12 - Cisco 7921 phones

1 - (Offsite, within our WAN)

10 - 1242 APs connected to 3560s

I need to connect the phones in a way that provides as much security as possible with minimal latency. What configuration and implementation do you recommend that utilizes the ACS as a central point of authentication.

3 REPLIES
Cisco Employee

Re: Help with Wireless Phone Setup

Most secure 802.1x authentication type supported is EAP-TLS, but requires management of certificates. For fast roaming, you can use CCKM, which is supported with WPA(TKIP). If not wanting to use EAP-TLS, then can use EAP-FAST or PEAP.

See the 7921G Deployment Guide for more info.

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/6_0/english/deployment/guide/7921dply.pdf

New Member

Re: Help with Wireless Phone Setup

Most secure 802.1x authentication type supported is EAP-TLS,

Hi,

This is my first 7921G pone setup and I need to know or at least find a guide how to load certificates on a 7921 phone.

Any advice

Hall of Fame Super Silver

Re: Help with Wireless Phone Setup

I posted this on your other thread, but here is a link:

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/7_0/english/administration/guide/7921cfgu.html#wp1376129

-Scott
*** Please rate helpful posts ***
221
Views
0
Helpful
3
Replies
CreatePlease to create content