04-07-2015 07:53 PM - edited 07-05-2021 02:52 AM
I have Cisco 1040 AP with new code 15.3.3-JAB. I would like to skip the guest user authentication and display only the web page disclaimer option for Guest.
There is a option called web pass through from GUI and its working.
How can i add custom page and also display Accept and Decline button, before client access Internet connection.
Only way it can be done through CLI.
Please let me know, if any one working on same issue..
Thank you in advance....
04-09-2015 06:52 AM
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/116897-configure-technology-00.html#anc9
06-16-2015 06:58 AM
Hi,
Not sure if Cisco 1040 has this feature, but try to use this commands:
ip admission consent banner [file file-name | text banner-text]
http://www.cisco.com/c/en/us/td/docs/ios/sec_user_services/configuration/guide/12_2sr/sec_securing_user_services_12-2sr_book/sec_cons_feat_rtrs.html#wp1053058
http://blog.ipexpert.com/ios-authentication-proxy-with-consent-feature/
06-25-2015 08:10 AM
link below show you how to configure webauth on autonomous AP , and how to configure custom page on the aP
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/116897-configure-technology-00.html
07-06-2015 12:43 PM
Check the following Cisco document for proper configuration of Web Pass through.
http://www.cisco.com/image/gif/paws/107474/web_pass_config.pdf
Note: If you have a stand alone AP, you will need a 3rd party appliance or software to have the splash page option.
09-08-2017 07:28 AM
hello,
did you finally find a solution? I am having the same problem with a 3500. It would be great if you share the answer here.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide