Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to Verify for WLAN for WMM

How to verify that my Wireless card is WMM certified?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: How to Verify for WLAN for WMM

When you go into the properties of the card you should see a WMM section that you can set to disabled or enabled. Of your card is a/b/g/n OT supports WMM as it is needed to gain the N rates.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
2 REPLIES

Re: How to Verify for WLAN for WMM

When you go into the properties of the card you should see a WMM section that you can set to disabled or enabled. Of your card is a/b/g/n OT supports WMM as it is needed to gain the N rates.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: How to Verify for WLAN for WMM

I want to capture 802.11 frames using Linksys WUSB600N ver 1, ver 2 (Dual-band USB adapter and Omnipeak

Please guide me how i can do that?

1099
Views
0
Helpful
2
Replies