Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

is there any limitation of firmware or hardware for QoS configuration (4400 controller & 1252 AP's)

Hi Experts,

 

Before proceeding for adding AP model 1131 and 1252 into my set-up , I need to know whether any limitation of firmware or hardware for QoS configuration in wireless set-up .

 

I have 4400 controller and 1130 & 1250 AP models.

 

 

1 REPLY
VIP Purple

Hi Vinod,Since you have 4400

Hi Vinod,

Since you have 4400 controllers, you can run upto WLC 7.0.x code. Refer this for more detail

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

there is no specific limitation to 1131/1252 AP model as such, everything is WLC software dependent.

From later software 7.4.x,7.6.x,8.x, lots of improvement for QoS configuration & bandwidth control, but since your controller is old hardware, you cannot have those latest features.

here is a reference post on how QoS works in wireless environment

http://mrncciew.com/2012/11/28/understanding-wireless-qos-part-1/

HTH

Rasika

*** Pls rate all useful responses ****

45
Views
0
Helpful
1
Replies
CreatePlease login to create content