Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Max noise threshold for VoWLAN deployment

can anybody tell me what the max noise threshold is for a VoWLAN deployment

thx

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Max noise threshold for VoWLAN deployment

For Vocera deployment the badge should have at least -65 dBm RSSI and SNR should be above 25. Refer to Vocera deplyment in Cisco Unified Wireless Network Infrastructure document at http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080766d54.shtml#c5

More information at http://www.vocera.com/downloads/InfrastructureGuide.pdf

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806d11cb.shtml

Basically you have to ask your VoIP wireless phone vendor for signal related requirements.

1 REPLY
New Member

Re: Max noise threshold for VoWLAN deployment

For Vocera deployment the badge should have at least -65 dBm RSSI and SNR should be above 25. Refer to Vocera deplyment in Cisco Unified Wireless Network Infrastructure document at http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080766d54.shtml#c5

More information at http://www.vocera.com/downloads/InfrastructureGuide.pdf

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806d11cb.shtml

Basically you have to ask your VoIP wireless phone vendor for signal related requirements.

339
Views
0
Helpful
1
Replies