Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Not able to Print Using IPAD 2 with CISCO Leight Weight ACCES Point

Dear All,

We have recently connected a IPAD 2 in our wireless N/W, it works perfectly fine.

But when we are tyring to use its AIRPRINT function its just not detecting the HP PRINTER.

But when we connect the HP printer to a DLINK device then the IPAD is able to detect the printer and AIRPRINT is happening.

Is ther any setting on the AP or WLC ( 4400) to detect the Printer

Kindly Check

Regards,

Ranjit

  • Wireless IP Voice and Video
1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Not able to Print Using IPAD 2 with CISCO Leight Weight ACCE

Probably broadcast forward enabled and multicast setup, AirPrint uses the bonjour protocols as well.

Sent from Cisco Technical Support iPad App

8 REPLIES
New Member

Not able to Print Using IPAD 2 with CISCO Leight Weight ACCES Po

Dear Ranjit,

Is the HP and Ipad on the same subnet? Could you specify the ip of those?

New Member

Not able to Print Using IPAD 2 with CISCO Leight Weight ACCES Po

Dear Marco,

Both are on the same subnet

IP of IPAD ;--> 10.0.19.49/24

IP of Printer ;---> 10.0.19.69 /24

the IPAD is not able to detect the printer in wireless setting

New Member

Not able to Print Using IPAD 2 with CISCO Leight Weight ACCES Po

Could you please verify the Cisco WLC configuration? Let me know in private if you want mp@marcoprovenza.com

New Member

Not able to Print Using IPAD 2 with CISCO Leight Weight ACCES Po

Dear All,

Same is working now.

Regards,

Ranjit

New Member

Not able to Print Using IPAD 2 with CISCO Leight Weight ACCES Po

good work!!!

Re: Not able to Print Using IPAD 2 with CISCO Leight Weight ACCE

ranjit23,

What was the fix?

Justin

... typd on tny kybrd.

Silver

Re: Not able to Print Using IPAD 2 with CISCO Leight Weight ACCE

Probably broadcast forward enabled and multicast setup, AirPrint uses the bonjour protocols as well.

Sent from Cisco Technical Support iPad App

New Member

Re: Not able to Print Using IPAD 2 with CISCO Leight Weight ACCE

Dear Blakekrone ,

You are absolutely right; we just enabled Multicast on the cisco AP and it started working.

Regards,

Ranjit

1235
Views
0
Helpful
8
Replies
This widget could not be displayed.