Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

POE for Aironet 1131 on Catalyst Express 500

Hi all,

we are using 3 AP Aironet 1131 (Version 12.4(10b)JA3) in a WDS. All are connected to a Switch Catalyst Express 500 to receive their Power. The Problem is they work for some time and the the AP reloads without further errormessage.

Speed and Duplex mode are fixed on Switch and AP-Side. Does anybody now this problem or can give me a hint?

Thanks in Advance

Alex

2 REPLIES
Silver

Re: POE for Aironet 1131 on Catalyst Express 500

This can happen if power settings are configured incorrectly on the AP. Ensure that the correct parameters are configured. Here is a link which explains how to configure power on APs.

http://www.cisco.com/en/US/docs/wireless/access_point/12.3_2_JA/configuration/guide/s32frst.html#wp1103896

Also, try disabling CDP and check if you are seeing the issue again.

New Member

Re: POE for Aironet 1131 on Catalyst Express 500

Hi,

thanks for the hints, but i found the issue: The problem was a damaged network cable. After exchanging the cable, all is working properly.

356
Views
0
Helpful
2
Replies