Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

problem with 7925 phones

HI all,  

I would like to share with you following problems:

The problem we still have is that some 7925 phones get stuck with the display saying “Konfiguriere IP” sometimes, I believe it is related to the renewing of the IP with the DHCP server.  

The only problem is that the phones sometimes lose their IP, so it’s only DHCP to look at. The phones are simple DHCP clients, the WLC is transparent for the DHCP.


here is config:



ip dhcp pool VOIP





   option 150 ip

   lease 30

interface Vlan25
 description VOIP
 ip address

The phones also seem to recover after some time, so they don’t know that it happened. Unfortunately we don’t know which phone is when affected. We just changed the phones to b/g only and EAP-FAST but it seems that makes no difference.

Thank you for help:)


Re: problem with 7925 phones

What is your WLC model and version?

Are you using or hreap access points?

What is your phones firmware version?

Does the problem affect all handsets? Or some?

Rating useful replies is more useful than saying "Thank you"
New Member

Re: problem with 7925 phones

phones 7925 with frimware 1.4.2

We are using version ov WLC    Product Version..................................,   series 5500

It seems that every phone can be affected.

Re: problem with 7925 phones

Are you using HREAP or local mode APs?

Do you have session timeout configured under the voice SSID? If yes, what ist he period that is configured?

Rating useful replies is more useful than saying "Thank you"
New Member

Re: problem with 7925 phones

If I click on Hreap groups I do not see any

Under WLANs H-Reap local switching and H-reap local auth is not enabled

Session Timout is not enabled

  Thank you for help

Cisco Employee

Re: problem with 7925 phones should be fine, but recommend to go to

There were some fixes in the 1.4(2) release for a phone side issue, but see you are running that already.

Suggest to use, which is the latest release.

What AP models are you using?

If using Cisco 11n AP & 5 GHz, then is best to use

If it is occuring with multiple phones simultaneously, then would more than likely be an infrastructure issue not a local phone issue.