Re: Push-to-talk with Nortel 6140 wireless handset + WLC 4400
That looks like the Spectralink group address. On the controller enable multicast and use an administratively scoped address in the 220.127.116.11/14 range, and enable multicast routing between the controller an APs. The phone group address should not be the same as the WLC/AP group address. I have also seen multicast-unicast mode work as well, but might flood your network.
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...