Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

QoS only on AP's or Bridges also

Most documents mention QoS is available on the 350 AP, is QoS available on 350 Bridges. Also what if the 350 bridge is se into AP mode.?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: QoS only on AP's or Bridges also

Yes you can use QoS on the BR350, here is the link to the chapter in to BR350 documentation on QoS

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350brdgs/brscg/br350c3b.htm

David

2 REPLIES
Cisco Employee

Re: QoS only on AP's or Bridges also

Yes you can use QoS on the BR350, here is the link to the chapter in to BR350 documentation on QoS

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350brdgs/brscg/br350c3b.htm

David

New Member

Re: QoS only on AP's or Bridges also

We want to run VoIP between two buildings by using:

1st building: - Cisco Aironet 350 Series Bridge 12.02 T1

- Cisco Call Manager 3.1

- Cisco Catalyst 3524XL

- 8 Cisco IP phones 7960

2nd building: - Cisco Aironet 350 Series Bridge 12.02 T1

- Cisco Catalyst 3524XL

- 5 Cisco IP phones 7960

Using the QoS on the Aironet Bridge 350, is it sufficient ? Or have we to install router in every building?

Thanks!

187
Views
0
Helpful
2
Replies
CreatePlease to create content