Yes is based on customer requirements. If going the 802.1x route, would suggest EAP-FAST, PEAP or EAP-TLS. Can then use WPA or WPA2 depending on the level of security and encryption required. However, when using 802.1x, we recommend to implement CCKM (fast roaming), which is supported only with WPA(TKIP). Some customers rather go with the standards (i.e. PEAP vs EAP-FAST). In the future the 7921, will be able to do server validation as well by installing the authentication server certificate. For EAP-TLS, this requires higher management due to having to issue client certificates.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...