I am trying to set up the above hardware to take advantage of the wireless network in my warehouse. What I am looking for is Incoming PSTN calls go to the WIP310 and when I want to make a call from the WIP310, it goes to the PSTN port of the SPA3102. So far, no luck at all. If anyone can help a noob, I can provide whatever screen shots or addressing info that might help plus my undying gratitude. I'm lost.
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...