05-06-2014 10:51 PM - edited 07-05-2021 12:47 AM
Hi Team,
We have recently bought 2602i type access point for our organization.
Already we have some other Ap's AP1131G,AP1231G,LAP1142N and we have 5505 WLC with 6.0.199.4 code.
But the thing is 2602 is not supported for 6.0.199.4 code and other old Ap's are not supported to new Code as well.
Please suggest the current code which can support all the above access points.
Regards,
Arun
05-06-2014 11:50 PM
2600 requires a minimum of 7.2.110.X. At this code level, your 1130 and 1140 will be supported.
However, at that level, this means that your older 1230 is NOT supported.
You now have the option to run either the 2600 or the 1230 in autonomous mode.
05-07-2014 01:44 AM
Thanks LEo
will the 1130 and 1140 will support 7.4.100.0 version.
05-07-2014 02:40 AM
7.4.100.X will support 1130 and 1140, however, I strongly recommend you use 7.4.121.0 due to stability issues with 7.4.100.0.
05-13-2014 03:09 AM
you can check the compatibility matrix and max IOS supported on each AP from the given link
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
09-11-2014 09:19 AM
Hi,
If you upgrade your WLC 5505 to latest code, it would not restrict any legacy or old AP (1131,1231, LAP1142N) to join WLC.
you can also see the compatibility matrix which kashif shared.
09-11-2014 03:21 PM
If you upgrade your WLC 5505 to latest code, it would not restrict any legacy or old AP (1131,1231, LAP1142N) to join WLC.
Warning to all who is reading the above "recommendation" from a Cisco SALES person: This statement (highlighted above) contains multiple incorrect details.
Read the Release Notes carefully to know what models of APs are supported against what WLC firmware.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: