Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

triyng to restore an IOS...

Hello guys,

Im triyng to load an IOS from xmodem because my AP 1240AG
has no IOS, and these are the results:

ap: copy xmodem: flash:c1240-k9w7-mx.123-11.JA
Begin the Xmodem or Xmodem-1K transfer now...
CCCCCCCCCC           BB0BB0xmodem:: I/O error

what can be the problem??
how can I solve this?

i will apreciate so much your feedbacks!

Everyone's tags (1)
3 REPLIES
Hall of Fame Super Gold

Re: triyng to restore an IOS...

Using a TFTP Server to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Don't forget to rate useful posts.  Thanks.

New Member

Re: triyng to restore an IOS...

You may want to try a different Terminal application. Also, there's a command you can run before starting the transfer to up the baud rate so it will transfer faster.

New Member

triyng to restore an IOS...

Hello,

maybe too late now, but try changing the BAUD to 57600 baud,

Saludos

2143
Views
0
Helpful
3
Replies
CreatePlease to create content