Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgrading AP's

The following question/answer was taken from a past Wireless Tech Talk. Does anyone know if this includes the 4800 AP when upgrading from 11b to 11g? Or is this for 340's/350's only!

What is required to upgrade AP's from .11b to 11g., then from .11g to .11a? The migration from 802.11b to 802.11g is expected to be accomplished via a firmware upgrade, however, from 802.11g to 802.11a will require a hardware change, as it will use a different radio.

1 REPLY
Silver

Re: Upgrading AP's

If you have the newer 4800’s (not the old ones with the green switch) it should be fine. That’s the same as the 340. The older ones… probably not.

165
Views
0
Helpful
1
Replies