I am new to the CISCO forums and could not find info where I searched, so of someone can point me in the right direction it will be much appreciated.
We want to roll out Voice over Wireless LAN networks for a company, I need to investigate specific considerations for doing this over the 802.11n wireless network. Found technical papers on doing it for .11a and g, but nothing on .11n . Would rather work with detailed info on .11n networks, than using legacy specs.
Thanks for the reply leolaohoo. Found info on these phones and their deployment already; I also found the CISCO deployment guidelines for 802.11b and 802.11g.
I want to know what to do differently for .11n, e.g. the bandwidth increase and MIMO technology (for example) result in a different deployment, like more clients per AP, and AP location considerations (more channels) etc?
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...